When your heater no longer works or is beyond repair, you need to have it replaced with a new one right away. However, after buying one at your local hardware or home improvement store, you might realize that you are not equipped to replace it yourself. You need to hire someone who has the training, experience, and tools for the job. These are some reasons to contact a professional heating repair technician about fast and thorough heating replacement in your home.…
If you live in a region where you do not need to make use of your central air conditioning system for a few months, then you need to shut the AC unit down. To do this properly so you avoid future problems and so the system is ready to go for the next summer, you will want to check out the following tips:
Have It Serviced By An HVAC Company…
If you are a homeowner, it’s smart to work with a heating contractor throughout the winter months. These are some of the ways that a heating contractor should be able to help you and your family.
Installing a New Heating Unit
The first thing that a heating contractor can help with is installing a heating unit in your home. They can help if you are building a new construction home or if you are switching to a different type of heating unit.…
If you tolerate being warmer than you like in the summer so you won’t drive up your power bill, look into ways to improve the energy efficiency of your HVAC unit. Even if your HVAC is old, you may be able to keep your home a little cooler without spiking the electric bill. Here are some tips that might help.
1. Install A Smart Thermostat
A smart thermostat is even more advanced than a programmable thermostat.…
According to the U.S. Energy Information Administration, at least 47% of American households used natural gas (2015 data) as their main source of heating. However, many people don’t know that gas furnaces come in various forms. Below are the three main types of gas furnaces to explore when shopping for a gas furnace.
Single-Stage Furnace
A single-stage gas furnace is the simplest form of gas furnaces. The furnace has only two settings for its control: on and off.…
A typical air conditioner (AC) alternates between on and off cycles. A short cycling AC has unusually short cycles — the AC barely stops before it starts running again. Below are some of the reasons you should worry if your AC is short cycling.
System Stress
As an electromechanical system, your AC experiences more wear and tear when it runs than when it is dormant. Moving parts, such as the motors, belts, and fans, experience wear and tear due to friction and elevated temperature.…
As the temperatures heat up, chances are that you will want to run your central air conditioning more. Though you want your home to cool down, you don’t want cold air running constantly. This can not only be uncomfortable but also cost you money. Here are some of the reasons why your air conditioner keeps running and what kind of air conditioning repair your unit may need.
Dirty Filters
Dirty filters block airflow.…
When you’re ready to get a new central air conditioner installed, you have several decisions when it comes to the type of unit you get and where you’ll have it installed. For instance, you can have an air conditioner installed on the ground, on the wall of your house, or on the roof. Here’s a look at these three options.
1. Installing An AC On The Ground
Many people choose to install air conditioners on the ground on concrete pads.…
It can be frustrating when your home’s air conditioner fails on a hot day, leaving you to sweat while trying to figure out the problem. The following are three common reasons that AC systems fail, along with some tips on how to remedy the problems.
1. Thermostat Problems
Often, the problem with a malfunctioning air conditioner is actually with the thermostat. Try turning the thermostat down all the way to see if that forces the air conditioner to come on.…
Homes in the United States use a variety of techniques for heating and cooling, but a combination of split unit air conditioning and forced air heating is the most common. These systems are popular for their efficiency and because the shared use of duct-work can be highly cost-effective. While most modern furnaces and AC units are reliable, they still require service from time to time.
Understanding how often you should conduct routine repairs can save you money by ensuring that your system lasts for as long as possible.…
